All Products and Solutions
Pneumatics Kit 1 - Single Acting Cylinders
Out of Stock
This product does not qualify for FREE Shipping. Adding this product to your cart will result in a shipping charge.
Pneumatic cylinders use compressed air (rather than motors) to produce motion that rests in one of 2 states: fully extended or fully retracted.
The cylinder in Pneumatics Kit 1 is single-acting -- it uses air to extend the cylinder rod, but uses a spring to return to its contracted state. As a result, the cylinder may expand and contract at different speeds.
Kit 1 is a complete pneumatics add-on for VEX EDR. The cylinders are Single Acting, meaning they use air pressure to extend the piston, and an internal spring to allow the piston to retract.
- Uses one VEX EDR Controller I/O port per air cylinder
- Reservoir is filled using a standard tie pump fitting
(2) Solenoid Driver - Cable w/Driver, Connects one VEX EDR I/O Port to one Solenoid
(1) Tire Pump Fitting - Shraeder Valve With 4mm Tube Fittings - 8090410075
(1) Reservoir - Reservoir, 1-1/2" X 4", w 1/8"NPT & M5 port - US14227-S0400
(1) Pressure Regulator - Mini Regulator w/ 4mm Fittings - A-474-0000005
(1) "T" Fitting - "T" Fitting for Valves - KQ2T04-00 or "-00A"
(2) Cylinder - Single Acting Spring Return Cylinder 10mm Bore - NCJ2D10-200S
(2) Solenoid, On/Off - 3/2 Solenoid Valve, 5VDC - SY113-SMO-PM3-F
(4) Fitting for Valves - 4mm Tubing x M3 Thread - KJS04-M3 or KJL04-M3 or KQ2S04-M3G
(1) Fitting for Reservoir - 1/8 X 4mm Male Connector To Reservoir - KQ2H03-34S or "-34AS"
(2) Fitting for Cylinders - M5 Male Connector for Cylinders - KQ2S04-M5 or "-M5A"
(1) Tubing - 4mm X 1696mm Length Tubing - TUO425B-X81US1696
(2) Cylinder Mount - Mount for Cylinder - CYLINDER-MOUNT
(2) Cylinder Rod Pivot - Pivot for the Cylinder Rod - CYLINDER-ROD-PIVOT