Storage Bin 2: Tray 1
| Part | Photo | Part Number | Quantity | Location |
| V5 Optical Sensor |  |
276-7043 | 4 |  |
| Rubber Bumper Kit |  |
276-7499 | 12 |  |
| V5 Electromagnet |  |
267-7047 | 1 |  |
| Open End Wrench |  |
267-4350-001 | 6 |  |
| Line Tracker |  |
276-2154-001 | 6 |  |
| 3 Wire Extension Cable (24") |  |
276-1425-000 | 8 |  |
| V5 Smart Cable Crimping Tool |  |
276-5773 | 1 |  |
| T15 Star Drive Keys |  |
276-5011-001 | 2 | |
| T8 Star Drive Keys | |
276-5012-001 | 2 | |
| T15 Star Screwdriver |  |
276-5236-002 | 4 | |
| V5 Smart Cable Connectors |  |
276-5775-001 | 50 |  |
| V5 Bumper Switch v2 |  |
276-4858 | 2 |  |
| Limit Switch |  |
276-2174-000 | 2 |  |
| Red 5x Pitch Weighted Disk |  |
288-3445-2250 | 1 |  |
| Green 5x Pitch Weighted Disk |  |
288-3450-2250 | 1 | |
| Blue 5x Pitch Weighted Disk |  |
288-3196-2250 | 1 | |
| 3 Wire Extension Cable ( 36") |  |
276-1976-000 | 8 |  |
| Potentiometer V2 Assembly |  |
276-7417-000 | 4 |  |
Once all of the parts from the Workcell Kit have been placed into tray 1 of Storage Bin 2, tray 1 will look like this image.
