Skip to content
V5 Workcell Kit Storage - Bin 1: Base - STEM Labs Hardware

V5 Workcell Kit Storage - Bin 1: Base - STEM Labs Hardware

Once all of the parts from the Workcell Kit have been placed into the base of Storage Bin 1, the base will look like this image. 

Storage Bin 1: Base

Part Photo Part Number Quantity Location
15x30 Base Plate 15x30BasePlate.png 276-1341 3 VEX IQ bin Glow
Disk Feeder Assembly 276-7720-001.png 276-7720-001 1 VEX_IQ_Bin--glow__1_.png
Disk Feeder Assembly 276-7720-002.png 276-7720-002 1 VEX_IQ_Bin--glow__1_.png
Robot Arm Metal 276-7151-500.png 276-7151-500 2 VEX_IQ_Bin--glow__1_.png
Robot Arm Metal 276-7151-501.png 276-7151-501 1 VEX_IQ_Bin--glow__1_.png
Robot Arm Metal 276-7151-600.png 276-7151-600 1 VEX_IQ_Bin--glow__1_.png
Robot Arm Metal 276-7151-006.png 276-7151-006 1 VEX_IQ_Bin--glow__1_.png
Robot Arm Metal 276-7151-011.png 276-7151-011 1 VEX_IQ_Bin--glow__1_.png
Robot Arm Metal 276-7151-100.png 276-7151-100 1 VEX_IQ_Bin--glow__1_.png
Robot Arm Metal 276-7151-200.png 276-7151-200 1 VEX_IQ_Bin--glow__1_.png
Robot Arm Metal 276-7151-300.png 276-7151-300 1 VEX_IQ_Bin--glow__1_.png
Robot Arm Metal 276-7151-400.png 276-7151-400 1 VEX_IQ_Bin--glow__1_.png
Turntable Bearing Kit 276-5652-000.png 276-5652-000 1 VEX_IQ_Bin--glow__1_.png
Turntable Bearing Kit 276-5652-004.png 276-5652-004 1 VEX_IQ_Bin--glow__1_.png
Turntable Bearing Kit 276-5652-007.png 276-5652-007 1 VEX_IQ_Bin--glow__1_.png
Dry Erase Surface DryEraseSurface.png 276-7157-006 1 VEX_IQ_Bin--glow__1_.png
Robot Brain Mount Assembly RobotBrainMountAssembly.png 276-7152-002 1 VEX_IQ_Bin--glow__1_.png
Input Output Conveyor Bracket 276-7153-001.png 276-7153-001 8 VEX_IQ_Bin--glow__1_.png
Angle Couple Gusset AngleCoupleGusset.png 276-2578-001 8 VEX_IQ_Bin--glow__1_.png
Additional High Strength Chain HighStrengthChain.png 276-2172-001 60 VEX_IQ_Bin--glow__1_.png
Transport conveyor links TransportConveyorLink.png 276-7141-001 60 VEX_IQ_Bin--glow__1_.png
1x25 Steel Bar 1x25SteelBar.png 275-1141-001 8 VEX_IQ_Bin--glow__1_.png
30T High Strength Sprocket 30TSprocket.png 276-2252-007 4 VEX_IQ_Bin--glow__1_.png
Conveyor links ConveyorLink.png 276-2172-002 60 VEX_IQ_Bin--glow__1_.png


Once all of the parts from the Workcell Kit have been placed into the base of Storage Bin 1, the base will look like this image.

STEM-Labs-12.jpg

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.